use: Dust suction and drain hoses Suction and drain hoses for wear-resistant, wear-resistant, water-repellent, for vacuum or gravel trucks, sand, gravel, cement powder, dry fertilizers, iron ore and abrasives for processing from grains. Note. This hose is not designed for batch processing, for example, for the removal of railway transport. Litho Hydraulics is designed specifically
Ace Flex-Rite T-Series Fluoropolymer Lined Hose | Central
Flex-Rite T-Series fluoropolymer-lined hoses deliver advanced flexibility, crush resistance, and abrasion resistance. The hose liners are extra thick to provide better flex life and less permeation.
3/4'' SAE 100R14A PTFE Hose Assembly - Discount Hydraulic Hose
Maximum working pressure: 1,000 PSI This made-to-order hose assembly is available with either standard crimp Braided Hose Fittings or T Series PTFE Hose Fittings. Unless otherwise stated, all hose fittings shown below are steel with anti-corrosive plating.
PTFE Hose – Unisource-MFG
Series TSVO is easy to flex yet won’t flatten when bent, and is extremely crush resistant. A primary advantage of a thick tube design is its ability to be extended through the fittings and flared over to form a sealing face, eliminating any joint between fitting and hose.
Speedflow AN hose & fitting guide
Speedflow AN hose & fitting guide -10 AN 7/8 JIC 7/8-14 22.22 0.875” 20.38 0.802” (100 series) PTFE Hose (200 series) Push On Hose (400 series) The following five pages set out important technical details and tells you what the applications are for each AN hose type. 8
Fluoropolymer Hose & Fittings Products
in the hose industry as a leader in the design and development of application specific PTFE hoses. Many of our hose solutions have spawned new product lines, such as PAGE-flex SBF™, offering a smoothbore flexible hose with the same bend radius of a conventional convoluted hose.
R 14 P.T.F.E Hose – Alfa Hoses & Hydraulics Pvt Ltd
Home / Products / Hoses / Teflon (PTFE) Hose / R 14 P.T.F.E Hose APPLICATION P.T.F.E hose has an excellent temperature characteristics both in high and low temperature, Excellent chemical resistance, non contamination properties, low coefficient of friction and resists deterioration.
Aeroquip 2807 Series PTFE SAE 100R14A Hose - …
This shopping feature will continue to load items. In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading.
Straight Reusable PTFE Hose Ends - Redhorse Performance
Plumb your vehicle with the unrivaled fuel compatibility and high pressure rating of PTFE Hose with the RHP 1200 Series Reusable Swivel Seal PTFE fittings. As always, the RHP 1200 Series fittings are cut from 6061 T-6 aluminum on our CNC machine turning centers providing superior thread strength and smooth assembly. Ou
QUICK LOOK: Hose and flexible tubing - Swagelok
T series hose with alloy braid is rated to 1500 psig (103 bar). C series hose is rated from -20 to 340°F (-28 to 171°C) in the 1 1/2 and 2 in. nominal hose sizes. PB series hose is rated from -20 to 200°F (-28 to 93°C) in the 1 in. nominal hose size.
Permanent Fittings for PTFE Hose - 91/91N | Parker NA
Print Product Overview; Parker's 91/91N Series fittings are used with smooth bore, medium pressure PTFE hoses from the Parflex division. Our wide selection of crimp fittings for PTFE hoses include, but are not limited to, NPT, JIC and Seal-Lok™ designs with many fittings available in Stainless Steel for corrosive applications.
PTFE flexible hose double stainless steel braid I2T Series
TECHNICAL FEATURES. Technical-constructive features: Inner core in PTFE with double AISI 304 stainless steel reinforcement braid. Applications: Hoses of the PTFE series have been created mainly for the high pressure conduction of paints, oils, air, food and steam.
PTFE, The Go-To Technology For Chemical Resistant Race
There are three parts to a PTFE hose fitting compared to the typical two on a standard -AN hose end. The “socket” slides over the line before cutting the line to length. There is also the AN Fitting hose end that will install within the hose and thread to the socket.
Fragola 6k Series PTFE Hose and Fittings Assembly
Aug 23, 2014 · I'm trying to assemble 6k series plastic covered Fragola PTFE hose and real street fittings, all -8AN size. The only way I can figure the inner retainer will go on is to cut back the outer sheathing and slide the retainer over the inner until it bottoms.
Buy Hoses and Flexible Tubing | Swagelok
An email will be sent to your email address. If you don’t receive an email shortly, please check the email address and try again or contact your local Sales & Service Center.